Mobile Hipot DC HP30KV

The mobile Hipot DC HP30KV is an instrument for the latest generation of dielectric testing.

The output voltage is adjustable and can reach up to 30,000 volts DC. As the hipot tester is digital, it is possible to programme the voltage, test duration, maximum leakage current and ramp-up or ramp-down time, allowing more advanced tests to be performed automatically.

Has one LED to indicate the presence of high voltage in the output during a measurement and one two-colour LED to indicate the test result (passed/failed).

The system meets the strictest safety requirements and is divided into two modules, one for control and one for high voltage.

The high-voltage module is equipped with an audible alarm and both modules have an emergency stop switch. Via an Android device, it is possible to programme all parameters of the hipot, in addition to remote control of the tests, further enhancing security.

• Leakage current up to 20 mA: suitable for objects with a high leakage current, such as older medium voltage cables
• Remote control via Android device
• Measures output voltage and leakage current
• “Pass/Fail” LED indicator
• Adjustable parameters: voltage, max. leakage current, ramp and test duration
• Ripple < 2 %
• Polarity: negative voltage, positive ground
• USB and Bluetooth interface
• Built-in memory to store test results
• Lightweight and robust, designed for field work

Key features

• Test voltage up to 30 kV DC
• Adjustable voltage levels and timer for controlled testing
• Emergency stop switch on both modules
• Digital readout of voltage and leakage current
• Automatic spark detection, LED indicators and audible alarm
• Robust and portable housing for mobile use

Test voltage
2,000 V to 30,000 V

Test voltage resolutions
100 V from 10 kV to 30 kV
10 V to 9.99 kV

Test voltage accuracy
± (2 % of nominal value ± 2 digits) at 1 mA load

Polarity
Negative voltage, positive earth

Leakage current
Max. 20 mA

Leakage current resolution
0.01 mA

Leakage current accuracy
± (2 % of nominal value ± 2 digits)

Ripple
< 2 %

Measuring modes
Manual mode, Ramp test, “Pass/Fail” test and timed test

Safety

Emergency stop switches, Automatic spark detection, Visual indicators (LEDs) and Acoustic indicator

Display
Alphanumeric LCD display, 4 lines / 20 characters (Large number)

Chronometer
Up to 20 min, indication in seconds

Built-in memory
Memory for storing up to 16,000 measured values

Safety
IEC 61010-1

Protocol
Modbus
USB For configuration, control and downloading of stored values

Bluetooth
For configuration, control and downloading of stored values

MegaLogg3 software (desktop)

To transfer stored data in the equipment’s memory, analyse and generate test reports

BlueLogg app (Android device)
For remote control, to configure, perform tests and generate reports

IP rating
IP65 (with lid closed)

Operating temperature
-5 °C to 50 °C

Storage temperature
-25 °C to 70 °C

Humidity
95 % RH (non-condensing)

Power supply
200 – 240 V~ 50/60 Hz 720 VA

Weight
Control module: approx. 7.6 kg
High voltage module: approx. 7.6 kg

Dimensions
Control module: 450 x 360 x 190 mm
High voltage module: 450 x 360 x 190 mm