High-voltage tester 6 kV-100 mA GLP1-g 330

The standard high voltage tester adjustable to 6000V and maximum 100mA.

High-voltage manual mode

The GLP1-g tester is immediately ready to take your measurements. Using the unique manual mode, all integrated test methods can be applied immediately.
There is no need to generate a test sequence in advance! You just select the desired test method and start the high voltage test.

As with a multimeter, test results are displayed on the tester’s screen.
Thus, detailed evaluation of your test object is immediately possible. Even long-term analyses, lasting several hours, can be performed in this mode.

Production mode

High-voltage tests in production are performed manually with test guns and/or fully automatically. Thanks to its convenient guidance, the GLP1 provides perfect test conditions for these applications. For the inspection of different types of test objects, you can store up to 1,000 test sequences in the GLP1-g, which can be accessed and started using the touch display.

Typically, terminal boxes are used for connecting test object and tester or high-voltage pistols.

The GLP1-g can be easily integrated into your production line. The dimensions of the tester are based on a ½ 19″ or 19″ housing, meaning it will fit perfectly into your system.
Additional, flexible interfaces enable full remote control. A connection to a master PC or a PLC can be easily established.

You can store up to 1,000 test sequences for multiple test objects. These can be activated via an interface and the test can be started immediately.
All test results are accessible via this interface and can be stored in a central database by the master PC.
Moreover, it is possible to store the test results locally on the tester or in a computer network.

To achieve an even higher degree of flexibility in automation or to control more complex processes, we alternatively recommend our GLP2 testers.

High-voltage AC

• GLP1-g 330 : 50 to 6000 V AC potential-free @ 100 mA, resolution 1 V, ≥500 VA.
• Voltage adjustment manual adjustment: adjustable in steps of 1 V.
• Automatic test: adjustable in 1 V steps.
• Voltage regulation automatic electronic constant-voltage regulation with undervoltage control.
• Tolerance of setting standard value + 5V.
• Voltage measurement true RMS value or peak value, operator selection.
• Measurement accuracy devices up to 6 kV: ±0.25% of final value.
• Output frequency 47 to 63 Hz, depending on mains supply.

Current during high voltage test

• Test current and resolution.
• GLP1-g 330 : 100 mA, resolution 10 µA.
• Iksc ≥ 100 mA from ≥ 500 V, ≥ 500 VA according to VDE, EN and IEC standards.
• Isc ≥ 200 mA from ≥ 900 V, according to VDE, EN and IEC standards.
• Isc = short-circuit current.

Measurement and evaluation

• True RMS measurement.
• Total current or active current, selectable by operator.

Measuring accuracy

• High-voltage tester 25 mA to 200 mA: ±0.25% of final value ±0.1 mA.

Evaluation

• Upper current limit / Imax 0 to max. test current (tester model dependent), measured values equal to or below this limit are IO.
• Lower current limit / Imin 0 to max. test current (depending on tester model), measured values below this limit are NIO,
  This function serves for contact checking. This function can be deactivated.
• The upper limit of the current is always higher than the lower limit.
  Undervoltage If the test voltage is less than the standard value, the test result is NIO.
• Error message optical and acoustic.

General

• Test timer 0, 0.3 s, 0.4 s, 0.5 s to 200 h in increments of 0.1 s,
• mode: auto=test timer, mode: manual = continuous operation.
• Timer for ramp-up 0, 0.3 s, 0.4 s, 0.5 s to 24 h in steps of 0.1 s (0 = without ramp-up)
• Timer for ramp-down 0, 0.3 s, 0.4 s, 0.5 s to 24 h in 0.1 s increments (0 = without ramp-down).
• Measurement technique of U & I high-precision True r.m.s value or peak value measurement (VTRMS – VPeak – ITRMS).

Testmodus

Manual.
The voltage is adjusted manually using the rotary knob. Test is performed without a timer.
Shutdown in case of overcurrent.

Automatic

The voltage is adjusted automatically. The test is performed with timer.
Shutdown in case of overcurrent or current outside minimum / maximum limits.

Burn

Only at 6 kV up to 100mA
Voltage is adjusted manually using the rotary knob. Test is performed without timer.
No shutdown at overcurrent. Test current is electronically limited to max 100mA.

Discharge 0 to 100 ms

Provided the test connectors are still connected to the test object during the discharge process.

Residual voltage check

Not needed: every high-voltage test is followed by an automatic discharge within 100 ms.

Benefits at a glance

• All test methods fully electronically controlled.
• Fully automatic, semi-automatic or manual test sequence.
• Fully automatic or manual high voltage adjustment via dragon button.
• Operation via intuitive touch display.
• LabView driver (optional).
• 19″ rack for automation.
• Integrated test result memory.
• Traceable factory calibration certificate included.
• Safety according to EN50191.
• PLe, SIL3, Kat4 safety switching (depending on device variant and risk level).
• High process reliability.
• Remote control for automation.
• Digital potential-free 24 V inputs/outputs.