Second-chance safety tester GLP1-g 620

Neat used safety tester based on a GLP1-g 620, this safety tester has been returned due to purchase of a GLP2-Basic.

The tester will come with calibration certificate and 12-month warranty.

The GLP1-g 620 safety tester has the following measurement methods:

Ground measurement: 1 – 10 amps AC, 6 or 12 V, 0 – 1.2 ohms.

Insulation resistance test: 50 – 1000 V DC not potential-free, max. 10 GΩ, 2 mA safety current limitation.

Automatic switching between test methods.

Instead of wall socket and PE probe, the tester is equipped with a 10-pin industrial plug connector at the rear. A junction box, test cage or your individual test setup can be connected to this.

Eight pins of the 10-pin industrial connector are used:
PE1, PE1sense, PE2, PE2sense ( 2 x current and 2 x sense for the 4-wire measurement).

Technical specs

High-contrast 5″ TFT touch display with 480 x 272 pixels.
Test timer from 0.1 seconds to 100 hours.
Highly accurate and fast TRMS technology.
Internal clock with calendar.
Test plan storage for 1000 test plans.
Result storage for 840 test results.
Interfaces for PC connection, remote control or PrintCom.
Start/stop via switch at front or control plug at rear of tester.
Integrated digital 24 VDC inputs and outputs.
Warning and result light connections.
Various permanently defined inputs and outputs for remote control and PLC connection.
Fully compliant with CE standards, operation according to EN 50191 / VDE 0104.
Designed and manufactured according to EN 61010-1 / VDE 0411-1.

Interested in the GLP1-g safety tester — new or second-chance? Contact IONIO for current availability and pricing.