Water tap leak tests

Leak tester for checking the leak-tightness of water taps. IONIO can supply the leak tester and test module as a complete setup.

A leak test checks that a water tap has no leaks before it is sold or used. The test detects a pressure drop during a pressure phase with air; testing with air keeps the product clean.

This article covers what a leak test is, why it is used, and how it is performed in water tap production.

What is a leak test?

In water tap production, a leak test checks that the tap holds pressure. The tap is pressurised with air, and the measurement registers any pressure drop. Testing with air keeps the product clean.

Why is a leak test important?

A leak in a water tap can cause water damage and higher water bills. The tap should be checked for leaks before it is sold or used.

How is a leak test performed in water tap production?

The method depends on the product requirements and the applicable standards. For a water tap, a pressure test is the usual approach.

The tap is pressurised with air and the pressure is held for a set time while the system checks for a drop. If a leak is found, the tap can be repaired before it is sold or used.

The pressure level and test duration both affect the result, so the test has to follow the relevant industry standards to give accurate readings. IONIO can go through the test parameters with you in advance.